sPress2 Fingerprint Access Control

Robust fingerprint and dual frequency RFID access control for EM4102/4100/4200 and ISO14443 compatible transponders
The sPress2 is a robust fingerprint and RFID access control in a solid and waterproof full metal housing. The patented dual frequency RFID reading antenna is located behind the integrated LED bar. Authorized access is gained by placing your finger on the fingerprint sensor or by holding the transponder RFID card or key fob in front of the integrated RFID reader. The sPress2 can be configured as a standalone device for switching the integrated relay or as a reading device for connection to external access control evaluation units.Technical characteristics
- Transponder with 125kHz EM & 13.56MHz ISO1443 chip compatible
- waterproof zinc alloy case,
- Support 125KHz EM&HID card and 13.56MHz ISO14443A at the same time
- Optical fingerprint sensor with low power consumption
- Configuration with infrared remote control
- Can be set as reading mode, single door mode, interlock mode or demo mode.
- The output format can be set by the user.
- Support 5 methods including card, fingerprint and multi-cards to open the door.
- Supports Super Open Card (fingerprint) operation.
- Door opening with fingerprint or transponder
- Deletion even if the transponder is absent or lost
- NO, NC, COM relay potential-free (suitable for doors, barriers, underground car parks, roller shutters, etc.)
- Integrated Wiegand interface
· Input/output switching with two sPress2 possible
· Lock function with two sPress2 possible
- Tamper contact in the housing
- Connection for door contact for door monitoring
- External door release button can be connected
- Switching time adjustable from 50ms to 999s
- Permanent switching can be activated
- Power failure safe EEPROM memory
- Red backlit sensor field
- Integrated LEDs and beeper
- Transponder reading distance: up to 6cm
- Fingerprint reading time : < 1 sec.
- Fingerprint identification time: < 1 sec.
- Power supply: 12V DC stabilized

Specification:
Material: zinc alloy
Input voltage: DC10~14V
No-load current: ≤50mA
Card reader type: 125 kHz: EM/HID 13.56 MHz: Mifare/CPU/NFC (ISO14443A)
Card capacity: 20000 user cards, 21 admin cards
Fingerprint capacity: 219 users, 21 admin cards
Reading card distance: 125KHz: ≤5cm 13.56MHz: ≤2cm
Output Format: Card: wiegand 26-66 bit (HID card output wiegand 26-66 automatically.)
Working Temperature: -20~60℃
Working humidity: 0 ~ 95% (no condensation)
Product Dimension: 170*83*35mm
including programming device
including learning and erasing cards
Download: German assembly and operating instructions as PDF
Optional accessories
Installation cable sold by the metre
transponder
power supplies
door opener
Network access controller (high security, thanks to tamper-proof internal evaluation unit/controller)
or
Compact controller (high security, thanks to tamper-proof internal evaluation unit/controller)