These external readers send the UID code of an EM410x tags to the
access controller via the Wiegand interface (WEG26/34). The
authorization of the transponder is then checked in the controller. If
the RFID tag was previously authorised in the controller, the relay now
switches and the door can be opened. The internal switching of the relay
ensures that access control is safe from tampering with the housing or
cabling. The evaluation and switching process takes place from the
secured access area.
Glass touch keypad and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders
Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad
The use of plastic on the housing could almost be dispensed with.
Potted waterproof, suitable for outdoor areas
Multifunction with PIN code and RFID multi-protocol reader
Standalone function with relay output
Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective.
Technical details:
PIN code and RFID reader full metal housing
Glass keypad
Color: cappuccino black
Operating mode: standalone or reader (Wiegand)
Dual frequency 125 khz and 13.56 Mhz
RFID chip types 125KHz: HID prox, EM4200, EM4102 UID
RFID chip types 13.56MHz: ISO 14443
Output format: Wiegand 26 / 34bit
Housing: waterproof encapsulated IP65
LED and beep can be switched off
Power supply: 12V DC, 50mA
Dimensions: 170 x 83 x 26mm
Download instruction manual: sKey2 instruction manual.pdf
Access Control Multi RFID Reader
RFID wall mountable reader for EM4102 and 13,56MHz
Full metal housing with concentrated double reading field through the LED barInternational award-winning designPotted waterproof, suitable for outdoor areas
TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective.
Material: full metal, finished,
Color: cappuccino black
Dimensions: 103x48x22 mm
Temperature range: -20 ° C to 50 ° C
Protection class: IP65
Multiprotocol RFID: 125kHz: EM4102, EM4100, EM4200
Compatible RFID Chip types:13.56 MHz: compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A
Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2 and EV3 , compatible to Ultralight®, NTAG and compatible 7byte UID
Power supply: 12V DC, <35mA
Operating display: LED bar red
Green LED bar and beeper can be controlled
Tampering alarm function
The cable length to the controller can be up to 100m.
Wiegand output: 34 bit for all protocols
Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cm RFID Chip type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Glass touch keypad and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders
Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad
The use of plastic on the housing could almost be dispensed with.
Potted waterproof, suitable for outdoor areas
Multifunction with PIN code and RFID multi-protocol reader
Standalone function with relay output
Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective.
Technical details:
PIN code and RFID reader full metal housing
Glass keypad
Color: cappuccino black
Operating mode: standalone or reader (Wiegand)
Dual frequency 125 khz and 13.56 Mhz
RFID chip types 125KHz: HID prox, EM4200, EM4102 UID
RFID chip types 13.56MHz: ISO 14443
Output format: Wiegand 26 / 34bit
Housing: waterproof encapsulated IP65
LED and beep can be switched off
Power supply: 12V DC, 50mA
Dimensions: 160 x 45 x 26mm
Download instruction manual: sKey2 instruction manual.pdf
Ruggedized PIN code and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders
Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad
The use of plastic on the housing could almost be dispensed with.
Potted waterproof, suitable for outdoor areas
Multifunction with PIN code and RFID multi-protocol reader
Standalone function with relay output
Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective.
Technical details:
PIN code and RFID reader full metal
Color: cappuccino black
Operating mode: standalone or reader (Wiegand)
Dual frequency 125 khz and 13.56 Mhz
RFID chip types 125KHz: HID prox, EM4200, EM4102 UID
RFID chip types 13.56MHz: ISO 14443
Output format: Wiegand 26 / 34bit
Housing: waterproof encapsulated IP65
LED and beep can be switched off
Power supply: 12V DC, 50mA
Dimensions: 170 x 83 x 26mm
Download instruction manual: sKey2 instruction manual.pdf
Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)
Installation and operating instructions
Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Fingerprint / Fingerprint Reader and RFID Readerfor contactless universal transponderssolid waterproof metal housing IP663000 memory locations (1000 fingerprints, 2000 transponders)Fingerprint or transponder can open the doorDeletion even in the absence or loss of the tag or fingerprintController and Wiegand interface integratedUse as stand alone device (standard)Can be used as Wiegand Reader (sabotage-proof with controller in the safe area)Lock function possibleExternal door release button can be connectedSabotage contact in housingConnection for door contactFor doors, barriers, underground garages, roller shutters, etc.Relay output adjustable from 01 - 99 seconds (operating current or quiescent current)or continuous operation ON-OFF-OFF-OFF....Switching time of the alarm output (sabotage) adjustable from 1 - 3 minutesPower Fail-safe EEPROM memoryNo PC connection neededRed backlit sensor fieldLEDs and beeper integratedRead distance transponder: up to 6cmFinger sensor resolution: 500 DPIReading time: < 1 sec.Indentification time: < 1 sec.FAR: < 0,01%FRR: < 0,1%Dimensions: 128x48x26mmWeight: approx. 400gPower supply: 12V DC voltage stabilizedPower consumption quiescent: approx. 45mATemperature range: -30°C to 60°COutput load: max 2ARFID type: Universal 125kHz (EM4102 or compatible)incl. interface: Wiegand 26bit to 44bit adjustableincl. programming deviceincl. learning and cancellation cardsAssembly and Operating Instructions as PDFOptional accessoriesInstallation cableRFID card and fobsPower suppliesDoor openerAccess ControllerorController Compact
Active RFID mini reader antenna for RFID EM tags
For installation in wood panels, tiles, metal, 20 mm hole
Sabotage safe because the controller is mounted into the security restricted area
Sabotage attempts are ineffective on the antenna
Integrated LED
Standby LED = red
RFID detected LED blinks red
LED can be deactivated if jumper wire "yellow" to GND
Waterproof housing, suitable for outdoor applications
Mass Cap: D26x3mm
Threaded hole dimensions: D20
Power supply: 12V DC
Power consumption: approx. 30mA
Temperature range: -30° C to 60° C
Protection class: IP68
Cable length: 15 cm
Read speed: 0.1 seconds
Interface: Wiegand26 bit orWiegand 34bit if Wire "brown" to GND
2 wires for data transfer
The cable length can be up to 100 m to the controller.
Reading distance: up to 2 cm
Transponder type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for contactless EM tags Sabotage-proof because the evaluation / controller is mounted in the security area Sabotage attempts on the antenna are ineffective LEDs and Beeper integrated Waterproof shed, suitable for outdoor applications Dimensions: 88x88x15mm Colour: pure white high-gloss Power supply: 12V DC Current consumption: approx 30mA Interface: Wiegand 26/34 (switchable) 2 wires for data transfer The cable length to the controller can be up to 100m. Reading distance: up to 10cm RFID type: 125 kHz, EM4102, EM4100, EM4200, UNIQUE, or compatible (UID) Status display: Red LED on Transponder recognition: Green LED on, beeper onInstallation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for contactless universal transponder
and PIN Code ReaderSabotage-proof because the transmitter is mounted in the security area Tamper attempts on the antenna are ineffective Intergrated LED and beeper Waterproof IP65 sealed Dimensions: 86x86x19mm Power supply: 12V DC Current consumption: 45mA 2 wires for data transfer (send and receive) The line length to the controller can be up to 100m. Reading distance: up to 10cm RFID type: 125kHz, EM4102 (Universal) and compatible Status indicator: LED red Transponder detection: Green LED, beeper to
Optional Accessories:
Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Reader with integrated RFID antenna for contactless Tags, Cards, Key fobs
solid steel housing, matted surface, vandal and tamper-proof
For use with access controller
Wiegand port for connection to door controller
blue backlit keypad
LEDs and beeper Intergrated
Reading distance: up to 6cm
Temperature range: -40 ° C to 60 ° C
Dimensions: 128x82x28mm
Weight: ca.500g
Power supply: 12V DC (8-14V)
RFID type: Universal 125kHz (EM4102 or compatible)
Installation and operating instructions
Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna, long rangeWide-range antenna / distance antennaSuitable for all contactless universal transponder EM4102 or compatible.Sabotage safe because the electronic components are mounted in the security areaSabotage on the antenna are ineffectivebeeper IntergratedSplash-proof, suitable for outdoor applicationsDimensions: 240x240x35mmPower supply: 12V DCPower consumption 100mA
2 wires for data transfer (send and receive)
The cable length to the controller up to 100m
Read range: cards up to 80cm , key fobs up to 60cm
Tag type: 125kHz, EM4102 (Universal) and compatible
Temperature range -20 ° C to 70 ° C
Wiegand26
Optional Accessories:
Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
ActiveRFIDreader antenna for EM RFID Cards and Tags
Solid plastic case
Secure trought the controller mounted into the security restricted area
Sabotage attempts are ineffective on the antenna
Integrated LED and beeper
Standby = LED off
Detection tag = short green LED
Beeper and green LED can be externally controlled
Waterproof resin, suitable for outdoor applications
Dimensions: 86x86x19mm
Mounting plate hole spacing 60 mm
Suitable for mounting on Flush-mounted boxes
Power supply: 12V DC
Power consumption: approx. 45mA
Temperature range:-20 ° C to 60 ° C
Protection class: IP68
Cable length: 20 cm
Read speed: 0.1 seconds
Interface: Wiegand 26/34 bit switchable
2 wires for data transfer (sending and receiving)
The cable length can be up to 100 m to the controller.
Reading distance: up to 6 cm
Transponder type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for EM RFID Cards and Tags
Solid plastic case
Secure trought the controller mounted into the security restricted area
Sabotage attempts are ineffective on the antenna
Integrated LED and beeper
Standby = LED off
Detection tag = short green LED
Beeper and green LED can be externally controlled
Waterproof resin, suitable for outdoor applications
Dimensions: 86x86x19mm
Mounting plate hole spacing 60 mm
Suitable for mounting on Flush-mounted boxes
Power supply: 12V DC
Power consumption: approx. 45mA
Temperature range:-20 ° C to 60 ° C
Protection class: IP68
Cable length: 20 cm
Read speed: 0.1 seconds
Interface: Wiegand 26/34 bit switchable
2 wires for data transfer (sending and receiving)
The cable length can be up to 100 m to the controller.
Reading distance: up to 6 cm
Transponder type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reading antenna for EM4102 tags, cards, key fobs
Sabotage-proof since the evaluation electronics / controller is mounted in the fuse area
Sabotage tests on the antenna are ineffective
LEDs and Beeper
Open circuit board for self-assembly
Dimensions of antenna: 60x36x2mm
Power supply: 12V DC
Interface: Wiegand 26/34 bit switchable
Power consumption: approx. 45mA
Reading distance: up to 10cm
Transponder type: 125 khz, EM4102, EM4100, EM4200, Unique or Compatible (UID)
Status indicator: Red LED on
RFID detection: Green LED on, beeper on
Optional Accessories:
Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
RFID wall mountable reader for EM4102 andI SO14443 tag
Material: Plastic
Color: black
Dimensions: 120 * 85 * 23 mm
Temperature range:-40°C to 60°C
Protection class: IP68
RFID compatibility: 125 kHz: EM4102, EM4200, 13.56 MHz: ISO14443 ,
Power supply: 12V DC, 330mA
Wiegand output: 34bit
LED and beeper
RFID reading unit with integrated magnet for activating RFID cards and key fobs with switching contact
Compatible with EM4102 RFID technology
Solid plastic housing For mounting, e.g. on doors with connection to a separate evaluation unit Sabotage-proof because the evaluation electronics/controller is mounted in the security area LED and beeper integrated Standby = LED red Transponder detection = LED briefly green Beeper and green LED can be controlled externally Waterproof potted, suitable for outdoor applications Dimensions: 110x48x20mm Hole spacing of mounting plate 75mm Power supply: 12V DC Current consumption: approx. 45mA Temperature range: -20°C to 60°C Protection class: IP68 Cable length: 20cm Reading speed: approx. 0.1 seconds Interface: Wiegand26 / Wiegand 34 bit switchable 2 wires for data transmission (sending and receiving) The cable length to the controller can be up to 100m. Reading distance: up to 6cm Transponder type: 125 khz, EM4102, EM4100, EM4200, Unique or compatible (UID)
RFID and Code / 500 peopleMini reader with integrated RFID reader antenna for contactless tags, cards, fobs with EM4102 RFID ChipIntegrated controller and active antenna· - Use as a standalone device (standard)· - Use as Wiegand26 readers with a door controller· - Connecting of external readers is not possible500 memory locations for transponder500 memory locations for keyboard codesOnly transponder code or RFID, RFID code +Individual transponders deleted in case of lossExternal door opener button can be connectedTamper switch in the housingConnection for door contactOpen doors, gates, garages, shutters, etc.12V switching output 00-99 seconds adjustable (shunt or quiescent)Power failure safe EEPROM memoryNo PC connectionReading Distance: 3 - 10cmDimensions: 90x60x27mmPower supply: 12V-24V DCCurrent consumption: 20mABacklit keypadLoad switch output: 2000mA maxTransponder type: Universal 125kHzTemperature range: -40 ° C to 60 ° CAssembly and operating instructions
Optional Accessories
Tags, Cards, Fobs
Reader (W1-C is indoor mounted)
Controller (W1-C is outdoor mounted as Reader)
Power Supplies
Locker & Strikes
Active RFID reader antenna for contactless EM Tags Sabotage-Safe full metal case Tamper-proof mounted since the transmitter / controller in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 135x58x26mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID Chip typ: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for contactless EM tagsSabotage-Safe full metal case Tamper-proof mounted since the transmitter / controller in the security area is Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 128x82x28mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)
EM4102 RFID Reader for Access Control
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for contactless EM Tags, Cards, Keyfobs Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: RS232 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cm Transponder type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)
kompatible with:
KEYFLEX 1000 aktiv
SEBURY W1
SEBURY W2
SEBURY K3A
SEBURY K4A
SEBURY BC2008NT
SEBURY BC800NT1
SEBURY BC800NT2
SEBURY BC800NT4
SC901NT
SC902NT
SC904NT
Active RFID reader antenna for tags with EM RFID Chip
Solid plastic housing with metal casing
SSecure through the sabotage safe mounted controller in the security restricted area
Sabotage attempts are ineffective on the antenna
Integrated LED and beeper
Standby = LED off
Detection tag = short green LED
Beeper and green LED can be externally controlled
Waterproof resin, suitable for outdoor applications
Dimensions: 110x48x20mm
Power supply: 12V DC
Power consumption: approx. 45mA
Temperature range:-20 ° C to 60 ° C
Protection class: IP68
Cable length: 20 cm
Read speed: 0.1 seconds
Interface: Wiegand 26/34 bit switchable
2 wires for data transfer (sending and receiving)
The cable length can be up to 100 m to the controller.
Reading distance: up to 6 cm
RFID Chip Type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for EM4102 tags
Solid metal case
Secure through the sabotage safe mounted controller in the security restricted area
Sabotage attempts are ineffective on the antenna
Integrated LED and beeper
Standby = LED off
Detection tag = short green LED
Beeper and green LED can be externally controlled
Waterproof resin, suitable for outdoor applications
Dimensions: 104x50x19mm
Power supply: 12V DC
Power consumption: approx. 45mA
Temperature range:-20 °C to 60 °C
Protection class: IP68
Cable length: 20 cm
Read speed: 0.1 seconds
Interface: Wiegand 26/34 bit switchable
2 wires for data transfer (sending and receiving)
The cable length can be up to 100 m to the controller.
Reading distance: up to 6 cm
RFID Chip: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID)
Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label
Active RFID reader antenna for universal contactless ISO14443 tags, cards, label, fobs Tamper-proof because the transmitter is mounted in the security area is Sabotage attempts on the antenna are ineffective Intergrated LED and beeper Water resistant, suitable for outdoor applications Dimensions: 100x42x16mm Housing Color: Black Power supply: 12V DC 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Transponder read distance: up to 8cm Transponder type: EM4102, 125 kHz
Optional Accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label