The door openers we offer are connected to your access control system
and thus enable door opening with transponder, code keypad and
fingerprint. Our door openers are connected to 12 V DC and can also be
used in the access control systems of other manufacturers. New in the
shop are our automatic door locks, which lock the door automatically
when closing the front door as with the motor lock.
12V Signalgeber für Gleichspannungkann z.B. parallel zu einem Gleichspannungs-Türöffnerverwendet werden um akustisch die Türöffnung anzuzeigen.zu hören ist.
Maße: D10x10mmFrequenz: 2600 Hzmit Anschlussleitung 15cm
High-quality key safe with various access options
The weatherproof metal D3 key safe can be opened with a fingerprint, PIN code, smartphone app or RFID transponder. It can be fixed to the wall next to the door or hung up on the doorknob or railing or similar using steel brackets.
A so-called 5-minute code can be assigned remotely, for example to give holiday guests access to the keys to the holiday apartment or holiday home. You generate a unique 9-digit PIN code via the smartphone app, which you can then announce to your holiday guests by phone or send it by SMS, Whatsapp or email.
This code is deleted again after 5 minutes and is then ineffective.
Technical characteristics:
- Zinc alloy weatherproof housing- Supports RFID transponder 13.56MHz ISO14443A- Capacitive fingerprint sensor with low power consumption- Configuration via smartphone app Tuya- Door opening with fingerprint or transponder or PIN code or via Bluetooth
- Power failure safe EEPROM memory
- Backlit sensor field with button tones (can be switched off)- English voice announcement integrated (can be switched off)
Specification:Material: zinc alloyBattery operation: 4x1.5V AAA (not included)Emergency power supply via USBStorage space for transponders/PIN codes: 150 usersStorage space fingerprints: 100 usersWorking temperature: -25°C to 55°CDimensions: 122x72x52mm
Download: German assembly and operating instructions as PDF
Electric strike DIN right / left Mortise door lock with a flat plate (short) for 12V DC DC Function of load current Current consumption approx 700 mA tested up to 600kg including a small door plate including mechanical Switch for continuous door opening (interlocksystem) including memory function (door can be opened by current pulse x 1) including horizontally adjustable latch Suitable for all standard doors
Electric strike DIN right / left Mortise door lock with a flat plate (short) for 12V DC DC Function of load current Current consumption approx 700 mA tested up to 600kg including a small door plate including mechanical Switch for continuous door opening (interlocksystem) including memory function (door can be opened by current pulse x 1) including horizontally adjustable latch Suitable for all standard doors
Electric strike DIN left / right Mortise door opener with flat striking plate (long) With integrated monitoring contact (case contact) for 12V DC DC Function Shunt Current approx 220mA tested up to 800kg including long doorplate including mounting screws and free-wheeling diode suitable for all standard doors The integrated monitoring contact can connected to the door controller (eg SC3004NT). The door information (is closed, or is stopped or opened without permission) is stored in the event memory and / or alarm will be signaled.
Mounting in the door frame (no moving cable transitions)Massive steel bolts D = 17mmextends 16 mmtested up to 2000kg door pressureQuiescent current (door is open during blackouts)for 12V DC DC voltage ("Red" and "Brown")not suitable for permanently controlled openFunction: opens on contact ("orange" to "Brown")Power consumption at opening 20mAStand by 110mADimensions bolt work: 170x28x36mmStriking plate dimensions: 205x30x39mmincluding feedback contact for monitoring purposes or alarm system("Blue", "Green" and "White")including LED (LED ON = Door locked , LED OFF = Door unlocked)including counterpart detection (bar closes again until, when the door was closed)When permission is unlocked and the door can be opened.Inner diameter proximity reader (output) or switchesScope of delivery see photo:-El. Locking-Counterpart-Aperture-Mountings for flush mounting-Screws
Electric strike DIN right / left Mortise door lock with a flat plate (short) for 12V DC DC Function of load current Current consumption approx 700 mA tested up to 600kg including a small door plate including mechanical Switch for continuous door opening (interlocksystem) including memory function (door can be opened by current pulse x 1) including horizontally adjustable latch Suitable for all standard doors
for wardrobe compartments, drawers, Medicine cabinets, etc. Battery operation for 1.5 - 2 years For standard batteries 4 x AA Mignon 1.5 V Quiescent current 0.015 mA With the registerd master tag you can add up to 15 tags per lock.Each tag can be justified on any number of furniture locks. Scope of delivery: - Indoor unit, with motorized locking latch - Counterpart - External device with RFID antenna and LED display - cover - Connection cable - Mounting material - Manual in English
The glass door is held in place by the door opener built into the frame. The door opener is released when the power supply is interrupted by the break contact. No changes to the door or cable transitions are necessary.For glass thickness from 12-15mmInstallation in the door frame (no moving cable transitions)tested up to 300kgQuiescent current (door is open in case of power failure)for 12V DC DC voltageCurrent approx. 200mAwith feedback contactDimensions: 160x25x31mmPDF Datasheet
Robust furniture lock for cupboard opening with RFID transponder (self-authorization possible) f
for wardrobe compartments, drawers, gym
medicine cabinets, etc. Suitable for: ISO14443, MIFARE® and NTAG
Battery operation for 1-1.5 years
For standard batteries 4 x AAA Micro
1.5V Quiescent current approx. 0.1mA
Basic function adjustable: public or private Self-authorization for changing users in locker rooms, gym
For a maximum of 30 user transponders per lock
Each transponder can be authorized on any number of furniture locks.
Scope of delivery: Indoor unit, with motorized closing
latch - counterpart
Outdoor unit with RFID antenna and LED display - Cover cap - Connection cable - Fastening material information sheet
for wardrobe compartments, drawers, Medicine cabinets, etc. Battery operation for 1.5 - 2 years For standard batteries 4 x AA Mignon 1.5 V Quiescent current 0.015 mA Set himself a master transponder which then entitled einzuspeichern new Benutztransponder into the castle. For max. 15 user transponders per lock Each transponder can be justified on any number of furniture locks. Scope of delivery: - Indoor unit, with motorized locking latch - Counterpart - External device with RFID antenna and LED display - cover - Connection cable - Mounting material - Manual only in English
Mounting in the door frame (no moving cable transitions)tested to 300kgQuiescent current (door is open when power failure)for 12V DC DC voltage ("Red" and "Black")Current approx 100mADimensions bolt work: 79x46x35mmMass counterpart: 91x30x226mmScope of delivery see photo:PDF Data Sheet
for wardrobe compartments, drawers, Medicine cabinets, etc. Battery operation for 1.5 - 2 years For standard batteries 4 x AA Mignon 1.5 V Quiescent current 0.015 mA Set himself a master transponder which then entitled einzuspeichern new Benutztransponder into the castle. For max. 15 user transponders per lock Each transponder can be justified on any number of furniture locks. Scope of delivery: - Indoor unit, with motorized locking latch - Counterpart - External device with RFID antenna and LED display - cover - Connection cable - Mounting material - Manual only in English
With the MS-A12 furniture lock for lockers, wardrobes, every user can store a card, key fob with RFID chip EM4102 or a PIN code in the furniture lock for one-time use. After opening the door, a new tag or PIN code can be authorised by a customer, employee, etc. immediately. Each customer or employee can therefore select a free locker, locker or locker and immediately save their own RFID or PIN code to open the door. Alternatively, the MS-A12 furniture lock can also be configured for the "Private" operating mode. In this mode, up to 200 tags or PIN codes can be permanently stored. for cloakroom lockers, drawers, medicine cabinets, etc.Battery operation for 1.5 - 2 yearsFor standard batteries 4 x AA Mignon 1,5VQuiescent current approx. 0.015mASuitable for: EM4102, EM4100, EM4200 and compatibleYou set up a master card, which then authorizes new user card and fobs.For max. 200 user cards and fobs per lockEach user can be authorised at any number of furniture locks or in public mode, the lock is open and is locked as soon as any transponder is held in front of the reader. Only this one transponder can reopen the lock and is then automatically deleted.Scope of delivery:Indoor unit, with motorised latchCounterpartOutdoor unit with PIN code, RFID antenna and LED displayConnecting cableFixing material
Electric strike DIN right / left Mortise door lock without a plate for 12V DC DC Function of load current Current consumption approx 700 mA tested up to 600kg including a small door plate including mechanical Switch for continuous door opening (interlocksystem) including memory function (door can be opened by current pulse x 1) including horizontally adjustable latch Suitable for all standard doors
für Garderobenfächer, Briefkasten, etc.für 12V DC GleichspannungFunktion: öffnet bei ArbeitsstromStromaufnahme ca. 320mAMaße: 55x55x25mmMaterial: schlagfestes NylonDer Riegel und das Gegenstück sind aus Stahl und fassen beim zudrücken der Tür ineinander.getestet bis 100 kgBei 12V Gleichspannung wird entriegelt und die Tür lässt sich öffnen.
Installationsleitung Meterware
Installation in the door frame (no moving cable transitions)Solid steel bolts D = 17mmmoves out 17mmtested up to 1000kg door pressureQuiescent current (door is open on power failure)for 12V DC voltage ("red" and "brown")Suitable for permanently controlled door openFunction: opens via make contact ("Orange" versus "brown")Current consumption at 30mA openingStand-by 120mADimensions Boltwork: 100x25x30mmDimensions striking plate: 260x30x39mmincluding feedback contact for surveillance or alarm system("Blue", "green" and "white")including counterpart recognition (bar closes again when the door was closed)When permission is unlocked and the door can be opened.Emergency opening always mechanically possible (internal rotary knob, outer cylinder key)Scope of supply see photo:- El. locking- Counterpart- aperture- Holders for flush mounting- Cylinders including rotary knob and 5 key- Covers and rosettes- Screws
Mounting in the door frame (no moving cable transitions)Massive steel bolts D = 17mmextends 16 mmtested up to 2000kg door pressureQuiescent current (door is open during blackouts)for 12V DC DC voltage ("Red" and "Brown")not suitable for permanently controlled openFunction: opens on contact ("orange" to "Brown")Power consumption at opening 20mAStand by 110mADimensions bolt work: 170x28x36mmStriking plate dimensions: 205x30x39mmincluding feedback contact for monitoring purposes or alarm system("Blue", "Green" and "White")including LED (LED ON = Door locked , LED OFF = Door unlocked)including counterpart detection (bar closes again until, when the door was closed)When permission is unlocked and the door can be opened.Inner diameter proximity reader (output) or switchesScope of delivery see photo:-El. Locking-Counterpart-Aperture-Mountings for flush mounting-Screws
The electromechanical door lock SVB520 can be mounted horizontally or vertically in addition to the existing locking mechanism. The door locking device consists of 2 parts, the actual bolt which is attached to the door frame and the housing for intaking the bolt. The electrical connection is made at the door bolt on the frame side of the door, so there is no need for movable cable transitions. The door bolt is "retracted" when the power supply is interrupted. tested up to 1000kg Quiescent current (door is open in case of power failure) for 12V DC DC voltage Current approx. 180mA with feedback contact Dimensions: 185x26x37mmPDF Datasheet
suitable for wooden doors, steel doors, fire doorsInstallation in the door frame (no mov cable crossings)Massive 16mm steel boltstested up to 1000kgfor 12V DC voltage ("red" and "brown")not suitable for permanently controlled openFunction: via normally open contact ("orange" to "Brown")Current consumption 950mA at openingStand by 20mADimensions boltwork: 100x25x30mmDimensions striking plate: 260x30x39mmincluding back contact for surveillance or alarm system("Blue", "Green" and "White")including counterpart identification (bar closes again when the door was closed)When permission is unlocked and the door can be opened.Always possible mechanical emergency opening (inside thumbturn key cylinder outside)Included, see photo:- El. locking- Counterpart- aperture- Brackets for flush mounting- Lock cylinder including 5 keys and rotary knob- Covers and rosettes- screws
