Readers for RFID tags and PIN code and fingerprint for access controllers

Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cm RFID Chip type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label    

Access Control Multi RFID Reader RFID wall mountable reader for EM4102 and 13,56MHz Full metal housing with concentrated double reading field through the LED barInternational award-winning designPotted waterproof, suitable for outdoor areas TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective. Material: full metal, finished, Color: cappuccino black Dimensions: 103x48x22 mm Temperature range: -20 ° C to 50 ° C Protection class: IP65 Multiprotocol RFID: 125kHz: HIDprox, EM4102, EM4100, EM4200 Compatible RFID Chip types:13.56 MHz:  compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2, compatible to Ultralight®, NTAG and compatible 7byte UID Power supply: 12V DC, <35mA Operating display: LED bar red Green LED bar and beeper can be controlled Tampering alarm function The cable length to the controller can be up to 100m. Wiegand output: 34 bit for all protocols    

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Glass touch keypad  and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal housing Glass keypad Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 160 x 45 x 26mm Download instruction manual: sKey2 instruction manual.pdf

Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID) Installation and operating instructions Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Ready for installation in wooden panels, tiles, also metal, 20mm hole required Tamper-proof (Controllers are mounted in the safe area) Tamper tests on the antenna are ineffective LED integrated Standby = red LED on Detection transponder = LED Red blinking LED switch off when wire (yellow) is disconnected Waterproof, suitable for outdoor applications Dimensions Cap: d26x3mm Dimensions thread Hole: d20 Power supply: 12v DC voltage Current consumption: approx. 30ma Temperature range:-30 °c to 60 °c Protection class: IP68 Cable Length: 15cm Reading speed: approx. 0.1 seconds Interface: Wiegand 34 bit 2 Cores for data transmission The line length up to the controller can be up to 100m. Reading distance: up to 2cm RFID type: 13.56 MHz, ISO14443 Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Sebury sKey wideStand alone access control systemISO14443 Can be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions sKey -w : 125x83x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Or use as Wiegand reader in conjunction with a door controller- Transponder data is transferred- Keyboard signals can be set as 4bit , 8bit or as a virtual card number- 26bit to 37bit adjustable WiegandmodusReadable transponder types :13.56MhzISO14443 1k, 4k, 4byte oder 7byteScope of delivery:- Outdoor unit / Access host sKey standalone wide- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadOptional AccessoriesInstallation cable by meter Power SupplyISO14443 TAGsDoor OpenerController Network Controller Compact Doorbell decoder  

Active RFID reader antenna for contactless EM tags Sabotage-proof because the evaluation / controller is mounted in the security area Sabotage attempts on the antenna are ineffective LEDs and Beeper integrated Waterproof shed, suitable for outdoor applications Dimensions: 88x88x15mm Colour: pure white high-gloss Power supply: 12V DC Current consumption: approx 30mA Interface: Wiegand 26/34 (switchable) 2 wires for data transfer The cable length to the controller can be up to 100m. Reading distance: up to 10cm RFID type: 125 kHz, EM4102, EM4100, EM4200, UNIQUE, or compatible (UID) Status display: Red LED on Transponder recognition: Green LED on, beeper onInstallation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Fingerprint / Fingerprint Reader and RFID Readerfor contactless universal transponderssolid waterproof metal housing IP663000 memory locations (1000 fingerprints, 2000 transponders)Fingerprint or transponder can open the doorDeletion even in the absence or loss of the tag or fingerprintController and Wiegand interface integratedUse as stand alone device (standard)Can be used as Wiegand Reader (sabotage-proof with controller in the safe area)Lock function possibleExternal door release button can be connectedSabotage contact in housingConnection for door contactFor doors, barriers, underground garages, roller shutters, etc.Relay output adjustable from 01 - 99 seconds (operating current or quiescent current)or continuous operation ON-OFF-OFF-OFF....Switching time of the alarm output (sabotage) adjustable from 1 - 3 minutesPower Fail-safe EEPROM memoryNo PC connection neededRed backlit sensor fieldLEDs and beeper integratedRead distance transponder: up to 6cmFinger sensor resolution: 500 DPIReading time: < 1 sec.Indentification time: < 1 sec.FAR: < 0,01%FRR: < 0,1%Dimensions: 128x48x26mmWeight: approx. 400gPower supply: 12V DC voltage stabilizedPower consumption quiescent: approx. 45mATemperature range: -30°C to 60°COutput load: max 2ARFID type: Universal 125kHz (EM4102 or compatible)incl. interface: Wiegand 26bit to 44bit adjustableincl. programming deviceincl. learning and cancellation cardsAssembly and Operating Instructions as PDFOptional accessoriesInstallation cableRFID card and fobsPower suppliesDoor openerAccess ControllerorController Compact

Robust fingerprint and dual frequency RFID access control for EM4102/4100/4200 and ISO14443 compatible transponders The sPress2 is a robust fingerprint and RFID access control in a solid and waterproof full metal housing. The patented dual frequency RFID reading antenna is located behind the integrated LED bar. Authorized access is gained by placing your finger on the fingerprint sensor or by holding the transponder RFID card or key fob in front of the integrated RFID reader. The sPress2 can be configured as a standalone device for switching the integrated relay or as a reading device for connection to external access control evaluation units.Technical characteristics - Transponder with 125kHz EM & 13.56MHz ISO1443 chip compatible - waterproof zinc alloy case, - Support 125KHz EM&HID card and 13.56MHz ISO14443A at the same time - Optical fingerprint sensor with low power consumption - Configuration with infrared remote control - Can be set as reading mode, single door mode, interlock mode or demo mode. - The output format can be set by the user. - Support 5 methods including card, fingerprint and multi-cards to open the door. - Supports Super Open Card (fingerprint) operation. - Door opening with fingerprint or transponder - Deletion even if the transponder is absent or lost - NO, NC, COM relay potential-free (suitable for doors, barriers, underground car parks, roller shutters, etc.) - Integrated Wiegand interface · Input/output switching with two sPress2 possible · Lock function with two sPress2 possible - Tamper contact in the housing - Connection for door contact for door monitoring - External door release button can be connected - Switching time adjustable from 50ms to 999s - Permanent switching can be activated - Power failure safe EEPROM memory - Red backlit sensor field - Integrated LEDs and beeper - Transponder reading distance: up to 6cm - Fingerprint reading time : < 1 sec. - Fingerprint identification time: < 1 sec. - Power supply: 12V DC stabilized Specification: Material: zinc alloy Input voltage: DC10~14V No-load current: ≤50mA Card reader type: 125 kHz: EM/HID 13.56 MHz: Mifare/CPU/NFC (ISO14443A) Card capacity: 20000 user cards, 21 admin cards Fingerprint capacity: 219 users, 21 admin cards Reading card distance: 125KHz: ≤5cm 13.56MHz: ≤2cm Output Format: Card: wiegand 26-66 bit (HID card output wiegand 26-66 automatically.) Working Temperature: -20~60℃ Working humidity: 0 ~ 95% (no condensation) Product Dimension: 170*83*35mm including programming device including learning and erasing cards Download: German assembly and operating instructions as PDF Optional accessories Installation cable sold by the metre transponder power supplies door opener Network access controller (high security, thanks to tamper-proof internal evaluation unit/controller) or Compact controller (high security, thanks to tamper-proof internal evaluation unit/controller)

Active RFID mini reader antenna for RFID EM tags For installation in wood panels, tiles, metal, 20 mm hole Sabotage safe because the controller is mounted into the security restricted area Sabotage attempts are ineffective on the antenna Integrated LED Standby LED = red RFID detected  LED blinks red LED can be deactivated if jumper wire "yellow" to GND Waterproof housing, suitable for outdoor applications Mass Cap: D26x3mm Threaded hole dimensions: D20 Power supply: 12V DC Power consumption: approx. 30mA Temperature range: -30° C to 60° C Protection class: IP68 Cable length: 15 cm Read speed: 0.1 seconds Interface: Wiegand26 bit orWiegand 34bit if Wire "brown" to GND 2 wires for data transfer The cable length can be up to 100 m to the controller. Reading distance: up to 2 cm Transponder type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna for contactless universal transponder and PIN Code ReaderSabotage-proof because the transmitter is mounted in the security area Tamper attempts on the antenna are ineffective Intergrated LED and beeper Waterproof IP65 sealed Dimensions: 86x86x19mm Power supply: 12V DC Current consumption: 45mA 2 wires for data transfer (send and receive) The line length to the controller can be up to 100m. Reading distance: up to 10cm RFID type: 125kHz, EM4102 (Universal) and compatible Status indicator: LED red Transponder detection: Green LED, beeper to   Optional Accessories: Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Ruggedized PIN code and dual frequency RFID access control for EM4102 / 4100/4200 and ISO14443 compatible transponders  Full metal housing with concentrated double reading field through the LED bar and solid PIN code keypad  The use of plastic on the housing could almost be dispensed with.  Potted waterproof, suitable for outdoor areas  Multifunction with PIN code and RFID multi-protocol reader  Standalone function with relay output  Reading function connected to Wiegand connection for evaluation units such as Sboard access controllers and SC3000NT. The relay switching then takes place inside, so attempts at sabotage on the wall reader are ineffective. Technical details: PIN code and RFID reader full metal Color: cappuccino black Operating mode: standalone or reader (Wiegand) Dual frequency 125 khz and 13.56 Mhz RFID chip types 125KHz: HID prox, EM4200, EM4102 UID RFID chip types 13.56MHz: ISO 14443 Output format: Wiegand 26 / 34bit Housing: waterproof encapsulated IP65 LED and beep can be switched off Power supply: 12V DC, 50mA Dimensions: 170 x 83 x 26mm Download instruction manual: sKey2 instruction manual.pdf

With this QR Code access system you can grant your customers or guests access with QR codes sent to their mobile phone or smartphone. Other possible applications include the activation of a goods issue, admission control for events, etc. The QR Code Reader is connected to the interface adapter included in the set at the SC3001NT controller reader input. After configuring the SC3001 access control with the management software, any QR codes can be created for the access.The set contains the following items:1 x QR Code Scanner BS-4301 x Access controller SC3001NT1 x Software Z3D in german1 x QR Code Software to create the QR Codes

Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 80x42x14mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 13,56 Mhz , ISO14443 1k and 4k

  Active RFID reader antenna for ISO14443 tagsPure white and extra flat, for mounting on flush-mounted boxesSabotage-proof because the transmitter / controller is mounted in the backup areaSabotage attempts on the antenna are ineffectiveLEDs and beeper integratedWaterproof shed, suitable for outdoor applicationsDimensions: 88x88x15mmColor: pure white high glossPower supply: 12V DCCurrent consumption: 45mAInterface: see selection above2 wires for data transfer (sending and receiving)The line length to the controller can be up to 100m.Reading distance: up to 10cmcompatible RFID type:13,56 Mhz, ISO14443 1k, 4k oder kompatibel (UID) Status indicator: Red LED onTransponder detection: Green LED, beeper to Status indicator: Red LED onTag identification: Green LED, beeper onOptional Accessory: Controller Tags, Cards, Key fobs

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

Active RFID reader antenna, long rangeWide-range antenna / distance antennaSuitable for all contactless universal transponder EM4102 or compatible.Sabotage safe because the electronic components are mounted in the security areaSabotage on the antenna are ineffectivebeeper IntergratedSplash-proof, suitable for outdoor applicationsDimensions: 240x240x35mmPower supply: 12V DCPower consumption 100mA 2 wires for data transfer (send and receive) The cable length to the controller up  to 100m Read range:  cards up to 80cm , key fobs up to 60cm Tag type: 125kHz, EM4102 (Universal) and compatible Temperature range -20 ° C to 70 ° C Wiegand26 Optional Accessories: Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

Aktive RFID Leseantenne für berührungslose  RFID Transpondermit seitlichem Kabelausgang und Selbstklebepads für Befestigung an Glastüren, Fenster mit Scheibenmontage als Hinterglas Befestigung Liest durch Doppelverglasung oder Holz keine Manipulation oder Sabotage möglich Beeper integriert Maße:70x70x15mm Gehäusefarbe: spaceblack Spannungsversorgung: 12V Gleichspannung Stromaufnahme: ca. 26mA Interface: Wiegand 26/34 bit 2 Adern für Datenübertragung (Senden und Empfangen) Die Leitungslänge bis zum Controller kann bis zu 100m betragen. Konfiguration Wiegand 26/34: Lesbare kompatible Transpondertypen: ISO14443 kompatibel, 13,56 Mhz , kompatibel zu MIFAR®E classic 1k oder 4k (4byte und 7byte), kompatibel zu Ultralight 64bit, Desfire® EV1, EV2, EV3, NTAG Transpondererkennung: Beeper an Optionales Zubehör: Installationsleitung Meterware TCP-IP ControlleroderController Kompakt Transponder

Robust mini reader for D1, D2, QR codesDimensions: WxHxD 41x23x50mmwith RS232 outputincl. power supply unitautomatic reading mode presetin conjunction with our Wiegand converter, an access control system with barcode cards can be set up.simple door controllerNetwork door controller

Tamper-proof mounted,  the  controller is  mounted in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 115x75x15mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cm Transponder type: 13.56 MHz, ISO14443 (UID), all types Optional Accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 80x42x14mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 34 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 13,56 Mhz , ISO14443 1k and 4k, and Desfire and Ultralight

Active RFID reader antenna for contactless HITAG tags Tamper-proof mounted, the controller is in the security area Dimensions module including antenna: 45x41x10mm Power supply: 12V DC Power consumption: about 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The line length to the controller can be up to 100m. RFID Reading distance: up to 10cm RFID type: 125 khz, HITAG 1, HITAG 2, HITAG S or compatible (UID) Status display: none