Self-AdhesivePlastic-foil laminated 25mmISO 14443 1k 4byteFrequency: 13,56 MhzDimensions: D25x0,6mmColor: transparentImprint Chip-number: noLabel Chip-number: no This Transponder is deployable to many manufacturer systems.

Button 30mmChip: EM4102 (Universal) Frequency: 125 khzDimensions: D30x2mmColor: greyImprint Chip-number: noLabel Chip-number: no This Transponder is deployable to many manufacturer systems.

Mini Keychainwith mini key ring D12mmISO14443Frequency: 13,56 MhzDimensions: 36mm x 15mm x 1mmColour: whiteFor better classification, a quasi sequential number is engraved.The number is unique, but no complete sequence can be guaranteed.

RFID and code / 2000 persons Access control system with integrated RFID reading antenna for contactless transponderssolid steel housing, protected against vandalism and sabotageWeatherproof seal 2000 memory locations (persons) Only transponder, only code or transponder + code Individual transponders can be deleted even if lost Integrated controller and active antenna Use as stand-alone device (standard) Use as Wiegand26 antenna possible External door release button can be connected Sabotage contact in the housing Connection for door contact For doors, barriers, underground garages, roller shutters, etc. Potential-free relay output adjustable from 00 - 99 seconds (change-over contact) Alarm output switching time (sabotage) adjustable from 0 - 3 minutes Power fail-safe EEPROM memory No PC connection Bell button for up to 100mA Blue backlit keypad Integrated LEDs and beeper Read distance: up to 6cm Dimensions:154x43x20mm Weight: approx.500g Power supply: 12V DC Power consumption: approx. 30mA Transponder type: 13.56 Mhz ISO14443 ® 1k, 4k, 4byte UID incl. interface: Wiegand 26 bit out German installation and operating instructions Optional Accessories Tags, Cards, Fobs Reader (W1-C is indoor mounted) Controller (W1-C is outdoor mounted as Reader) Power Supplies Locker & Strikes      

Active RFID reader antenna for EM4102 tags Solid metal case Secure through the sabotage safe mounted controller in the security restricted area Sabotage attempts are ineffective on the antenna Integrated LED and beeper Standby = LED off Detection tag = short green LED Beeper and green LED can be externally controlled Waterproof resin, suitable for outdoor applications Dimensions: 104x50x19mm Power supply: 12V DC Power consumption: approx. 45mA Temperature range:-20 °C to 60 °C Protection class: IP68 Cable length: 20 cm Read speed: 0.1 seconds Interface: Wiegand 26/34 bit switchable 2 wires for data transfer (sending and receiving) The cable length can be up to 100 m to the controller. Reading distance: up to 6 cm RFID Chip: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

RFID and code / 2000 personsAccess control system with integrated RFID reading antenna for contactless transponderssolid steel housing, protected against vandalism and sabotageWeatherproof seal2000 memory locations (persons)Only transponder, only code or transponder + codeIndividual transponders can be deleted even if lostIntegrated controller and active antennaUse as stand-alone device (standard)Use as Wiegand26 antenna possibleExternal door release button can be connectedSabotage contact in the housingConnection for door contactFor doors, barriers, underground garages, roller shutters, etc.Potential-free relay output adjustable from 00 - 99 seconds (change-over contact)Alarm output switching time (sabotage) adjustable from 0 - 3 minutesPower fail-safe EEPROM memoryNo PC connectionBell button for up to 100mABlue backlit keypadIntegrated LEDs and beeperRead distance: up to 6cmDimensions:154x43x20mmWeight: approx.500gPower supply: 12V DCPower consumption: approx. 30mATransponder type: 13.56 Mhz ISO14443 ® 1k, 4k, 4byte UIDincl. interface: Wiegand 26 bit outGerman installation and operating instructionsOptional AccessoriesTags, Cards, FobsReader (W1-C is indoor mounted)Controller (W1-C is outdoor mounted as Reader)Power SuppliesLocker & Strikes

Extra flat Network Cable UTP Cat.6Color: gelb , Lenght: 3m2 x RJ45  

Active RFID reader antenna for contactless EM Tags Sabotage-Safe full metal case Tamper-proof mounted since the transmitter / controller in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 135x58x26mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID Chip typ: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)   Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna for contactless EM tagsSabotage-Safe  full metal case Tamper-proof mounted since the transmitter / controller in the security area is Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 128x82x28mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID) EM4102 RFID Reader for Access Control Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

RFID Labelwith flexible antennaChip: ISO-18000-6CFrequency: 868 MhzRange:  up to 10mDimensions: 145mm x 10mm x 0,5mmColor: white with flexible antennaImprint Chip-number: noLabel Chip-number: noSelf-Adhesive: yes

Active RFID reader antenna for contactless EM tagsSabotage-Safe full metal case Tamper-proof mounted  controller in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 121x80x26mm Power supply: 12V - 18V DC Current consumption: approx 45mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

RFID Tag Waterproof sealed Chip: TI2048 Frequency: 125 khz Dimensions transponder disc: D30x4mmLaser engraving possible: yes (500 pcs)Color printing possible: yes (500 pcs)  

RFID Tag Waterproof sealed Chip: TI2048 Frequency: 125 khz Dimensions transponder disc: D30x4mmLaser engraving possible: yes (500 pcs)Color printing possible: yes (500 pcs)