RFID and code / 2,000 peopleReader with an integrated RFID reader antenna for contactless transponderSolid steel casing, matt, vandal and tamper-proof 2000 memory locations (people)Only transponders or transponder + CodeIndividual transponders can be erased if lostExternal door opener button can be connectedTamper switch in the housingConnection for door contactFor doors, gates, garages, shutters, etc.Opening relay from 01 - 99 seconds adjustableSwitching time of the alarm output (sabotage) from 00 - 99 minutes adjustableFail-safe EEPROM memory powerNo PC connectionblue backlit keypadIntergrated LED and beeperReading distance: up to 6cmDimensions: 128x80x25mmWeight: ca. 450grPower supply: 12V DC Power consumption: about 200mALoad relay: max 2000mATransponder type: Universal 125kHz (EM4102 or compatible)Installation and operating instructions

RFID access control system / waterproof IP65Color: WhiteAccess control system with integrated RFID reader antenna for contactless RFID tags 2000 memory slots for tags (people) Individual tags in case of loss erasable Stand-alone deviceExternal door opener button can be connected Tamper switch in the housing (light-sensitive sensor) For doors, gates, garages, shutters, etc Potential-free relay output 00-99 seconds adjustable (change)Or as a permanent contact (ON-OFF-ON) for switching operations, EMA, etc.Power Fail-safe EEPROM memoryNo PC connection Integrated tri-color LED bar and buzzer Power LED switched off Buzzer can be switched off Reading distance: up to 10cm Dimensions: 102x48x20mmWeight: 170gWorking temperature: -40 ° C to 60 ° CPower supply: 12V DC (9-18V) Current consumption: <40mA Switch Rating 2A RFID Tags: Universal 125kHz (EM4102 or compatible) and HID ProximityIncluding two master cards for fast learning or deletion Including infrared programmer for all changes settings (password protection 6 digits) English installation and operating instructions

Sebury STOUCH smallStand alone access control systemCan be used as a complete unit with integrated memory and relay outputoras tamper-resistant variant as a mere reader in conjunction with a door controller- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- 2000 memory locations for key codes and transponders- Adjustable : code or transponder / code and transponder / transponder only- Additional data output for professional applications : Wiegand 26-37 bits- Tamper switch in the housing- LEDs and beeper integrated- Audible alarm if tampering- Alarm output- Integrated change-over relay- Circuit as pulse 1-99 seconds- Or as a continuous circuit ON-OFF - ON-OFF for switching functions- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA )  or Doorbell decoder- Multi-user function , 2-10 persons must identify themselves before the door is opened.- Circuit as a single unit or as an anti -passback with two readers for one door- Transponder reading distance : up to 3 -10cm- Dimensions STOUCH s: 159x43x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white ( can be switched off or on automatic )- Keypad tones (can be disabled )Readable transponder types :125 kHz ( HID Prox , EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host STOUCH standalone wide- Manager Cards ( learning and delete card )- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFManual DownloadOptional AccessoriesInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder

Fingerprint access control door readerWall Mounting Only compatible to SC300xNT Türcontrollerwith access control management software from 7.81For Windows XP, Win7, Win8, Win10Supply 12V DC (100mA current consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIWiegand outputMatching fingerprint readerApplication/Description

Fingerprint access control door readerWall Mounting Only compatible to SC300xNT Türcontrollerwith access control management software from 7.81For Windows XP, Win7, Win8, Win10Supply 12V DC (100mA current consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIWiegand outputMatching fingerprint readerApplication/Description

RFID and code / 2000 personsAccess control system with integrated RFID reading antenna for contactless transponderssolid steel housing, protected against vandalism and sabotageWeatherproof seal2000 memory locations (persons)Only transponder, only code or transponder + codeIndividual transponders can be deleted even if lostIntegrated controller and active antennaUse as stand-alone device (standard)Use as Wiegand26 antenna possibleExternal door release button can be connectedSabotage contact in the housingConnection for door contactFor doors, barriers, underground garages, roller shutters, etc.Potential-free relay output adjustable from 00 - 99 seconds (change-over contact)Alarm output switching time (sabotage) adjustable from 0 - 3 minutesPower fail-safe EEPROM memoryNo PC connectionBell button for up to 100mABlue backlit keypadIntegrated LEDs and beeperRead distance: up to 6cmDimensions:154x43x20mmWeight: approx.500gPower supply: 12V DCPower consumption: approx. 30mATransponder type: 13.56 Mhz ISO14443 ® 1k, 4k, 4byte UIDincl. interface: Wiegand 26 bit outGerman installation and operating instructionsOptional AccessoriesTags, Cards, FobsReader (W1-C is indoor mounted)Controller (W1-C is outdoor mounted as Reader)Power SuppliesLocker & Strikes

With the MS-A12 furniture lock for lockers, wardrobes, every user can store a card, key fob with RFID chip EM4102 or a PIN code in the furniture lock for one-time use. After opening the door, a new tag or PIN code can be authorised by a customer, employee, etc. immediately. Each customer or employee can therefore select a free locker, locker or locker and immediately save their own RFID or PIN code to open the door. Alternatively, the MS-A12 furniture lock can also be configured for the "Private" operating mode. In this mode, up to 200 tags or PIN codes can be permanently stored. for cloakroom lockers, drawers, medicine cabinets, etc.Battery operation for 1.5 - 2 yearsFor standard batteries 4 x AA Mignon 1,5VQuiescent current approx. 0.015mASuitable for: EM4102, EM4100, EM4200 and compatibleYou set up a master card, which then authorizes new user card and fobs.For max. 200 user cards and fobs per lockEach user can be authorised at any number of furniture locks or in public mode, the lock is open and is locked as soon as any transponder is held in front of the reader. Only this one transponder can reopen the lock and is then automatically deleted.Scope of delivery:Indoor unit, with motorised latchCounterpartOutdoor unit with PIN code, RFID antenna and LED displayConnecting cableFixing material

FT6-weiss

RFID and Code / 500 peopleMini reader with integrated RFID reader antenna for contactless tags, cards, fobs with EM4102 RFID ChipIntegrated controller and active antenna· - Use as a standalone device (standard)· - Use as Wiegand26 readers with a door controller· - Connecting of external readers is not possible500 memory locations for transponder500 memory locations for keyboard codesOnly transponder code or RFID, RFID code +Individual transponders deleted in case of lossExternal door opener button can be connectedTamper switch in the housingConnection for door contactOpen doors, gates, garages, shutters, etc.12V switching output 00-99 seconds adjustable (shunt or quiescent)Power failure safe EEPROM memoryNo PC connectionReading Distance: 3 - 10cmDimensions: 90x60x27mmPower supply: 12V-24V DCCurrent consumption: 20mABacklit keypadLoad switch output: 2000mA maxTransponder type: Universal 125kHzTemperature range: -40 ° C to 60 ° CAssembly and operating instructions   Optional Accessories Tags, Cards, Fobs Reader (W1-C is indoor mounted) Controller (W1-C is outdoor mounted as Reader) Power Supplies Locker & Strikes

RFID main switch To switch off electrical loads Power-saving system, Power SaverFor hotel rooms, apartments, flats, offices, etc.Insert the card. Outlet and light can be used.Remove card. The 20 second timer is activatedLeave room      Lighting and outlets are disabledFor surface mountingSwitch 110V - 250V, 16A contactor or circuit, all circuitsInstallation only by qualified personnelResponds to any RFID card or compatible with EM4102 chip manufacturers   Info

 RFID and code / 1,000 peopleReader with an integrated RFID reader antenna for contactless RFID TagsSolid steel casing, matt, vandal and tamper-proof 1000 memory locations (people)Only Tags or Tags + CodeIndividual transponders can be erased if lostExternal door opener button can be connectedTamper switch in the housingConnection for door contactFor doors, gates, garages, shutters, etc.Opening relay from 01 - 99 seconds adjustableSwitching time of the alarm output (sabotage) from 00 - 99 minutes adjustableFail-safe EEPROM memory powerNo PC connectionblue backlit keypadIntergrated LED and beeperReading distance: up to 6cmDimensions: 128x82x28mmWeight: ca.500grPower supply: 12V DC (8-14V)Power consumption: about 100mALoad relay: max 2000mARFID Tags: Universal 125kHz (EM4102 or compatible)Installation and operating instructions

RFID and Code / 2,000 users Mini-reader with integrated RFID reader antenna for contactless transponder Controller and integrated active antenna · - Use as a standalone device (default)· - Use as a pure controller (also for antennas (LEGIC, ISO14443, Hitag, etc.)· - Use antenna as possible Wiegand26 2000 memory slots for transponder 2000 memory locations for key codesTransponder only or  Code only or Transponder + Code Individual transponders via integrated database deletable External door opener button can be connected Tamper switch in the housing Connection for door contact alarm output Open doors, gates, garages, shutters, etc. 12V switched output 00-10 seconds adjustable (open-circuit or closed circuit) Alarm output (sabotage) 1-3 minutes adjustable Fail-safe EEPROM memory power No PC connection Read range: 3 - 10cm Dimensions: 90x60x23mm Power supply: 12V DC (10-14V) Current consumption: approx 60mA Load switch output: 2000mA max Transponder type: Universal 125kHzInstallation and operating instructions Manual

RFID access system / waterproof IP65 / color: whiteAccess control system with integrated RFID reader antenna for contactless tags 2000 memory locations of tags (people) Individual tag event of a Deletable for loss Standalone device External door strike key can be connected Tamper in the housing (photosensitive sensor) For doors, barriers, parking garages, shutters, etc potential-free relay output of 00-99 seconds adjustable (changer) or as permanent contact (on off on) for switching operations, EMA, or similar. Power failure safe EEPROM memory No PC connection LED integrated bar and buzzer Power LED can be switched off Buzzer can be switched off Reading distance: up to 10 cm Dimensions: 102x48x20mm Weight: 170 g Operating temperature:-40 ° C to 60 ° C Power supply: 12V DC (9-18V) Power consumption: approx. &lt; 40mA Load relay contact 2A Transponder type: ISO14443 1 k (4 byte) including two master cards for fast learning or delete Including infrared programmer for all changes, settings (password protection 6 digits) English installation and operating instructions PDF manual Optional accessories Installation cable by the metre Transponder Power supplies Door opener

The RTU5024 is a remote switch which is controlled via a mobile radio. It can be used for all safety-relevant applications, as for the switching operation, the phone number of the inserted SIM card must be known and it can be triggered only by previously set telephone numbers.The programming is pretty easy with an Android App . A call of an authorized phone number is sufficient to trigger the switching operation. There is no cost, because of the RTU5024 of the call is not accepted, but checks only the number of the caller. For all "non-Android phones", you can easily set up the RTU5024 with the enclosed, German instructions via SMS commands. When you set up, you may incur costs for SMS.The actual use as access control is free. German manual is supplied orderQuad-band 850/900/1800/1900 MHzPotential-free relay output NO/NC, 3A/240VACPower supply 9-24VDCPower consumption at 12V Max 50mA, standby 25 mA50 ohm SMA antennaWorking temperature-20 ° C to + 60 ° CHumidity up to 90% RHDimensions 76 x 27 x 102 mm (Lxhxw)Weight 180 g

Fingerprint USB Desktop Reader for reading/managing and transmitting fingerprints with SC3000NT controller With the fingerprint USB Desktop reader, you can read the fingerprints of your users that you want to manage. After reading the users fingerprints the required informations are transferred via the access control management software to the wall Fingerprint reader FP3000.Compatible to SC300xNT Access Controllerin conjunction with the management software v. 7.81For Windows XP, Win7, Win8, Win10USB (100mA power consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIDeskop Version with standMatching fingerprint wall readerApplication/Description

PIN-Code radio access controly systemSabotage-Safe standalone set of outdoor and indoor unitPerfect for environments where no cable can be laid or the installation effort is too heavy.hopping code method, tamperproof 100 memory locations for key codes 4-8 digits2.4 Ghz data transfer between devicesRange up to 15m - Extreme power saving mode (standard batteries last about 2 years with 100 openings per day)Changeover relay for door opener or opening of gates, doors, shutters, etc., or for switching tasks such as alarm or light, etc. Relay output Pulse 01-99 seconds adjustable (open-circuit or closed-circuit) or permanent contact on-off switch for tasks such as alarm or light, etc.Power failure Secure EEPROM MemoryIntegrated LEDs and BeeperIncl "M3" double adhesive tape for mounting on glass or ceramic.Dimensions Keypad: 135x54x19mmDimensions Controller: 65x54x19mmPower supply Keypad: 3 x AAA battery 1.5VPower Supply Controller: 12V DC +/- 20%Current consumption keypad rest: 0,01mAPower consumption Controller rest: 20mAPower consumption Keypad active: 0.4mAPower consumption Controller active: 40mATemperature range: -20 ° C to 60 ° C (0% to 86% relative humidity)Indicator light: multicolor LED and beeper (can be switched off)

RFID and Code / waterproof / 2 relay outputs Reader with an integrated RFID reader antenna for contactless transponder Solid steel casing, matt, vandal and tamper-proof Waterproof IP68 sealedTotal 1200 memory locations1100 memory locations for relay 1and100 memory locations for relay 2Transponders only or  Code only or Transponder + Code4-6 digit code lengthIndividual transponders deletable if lostExternal door opener button can be connectedTamper switch in the housingConnection for door contactFor doors, gates, garages, shutters, etc.Two relay outputsOpening relay from 01 - 99 seconds adjustableor as a bistable relay (maintained)Switching time of the alarm output (sabotage) 1-3 minutes adjustableFail-safe EEPROM memory powerNo PC connectionblue backlit keypadIntergrated LED and beeperKey tones switched off Reading distance: up to 6cmDimensions: 128x82x28mmWeight: ca.600gPower supply: 12-24V DC or AC voltageCurrent consumption: approx 60mALoad relay: max. 2ATransponder type: Universal 125kHz (EM4102 or compatible) English and German Installation and operating instructions   Optional AccessoriesTags, Cards, FobsPower SuppliesLocker & Strikesat 240Vbei 240V►Zur Anzeige alternativer Übersetzungen klickenZiehen Sie zum Ändern der Reihenfolge mit gedrückter Umschalttaste.

Fingerprint reader and RFID reader for universal RFID tags Solid steel casing 2160 memory locations (160 fingerprints, 2000 tags) Fingerprint or RFID tag can open "the door" Deleting of absent users or lost tags is possible Wiegand controller and integrated Use as a standalone device (default) Use as a pure controller (also for antennas (LEGIC, ISO14443, Hitag, etc.) Use as possible Wiegand Reader (with Sure sabotage controller in the security area) An output circuit with two EM-F007 possible Lock function with two EM-F007 possible External door opener button can be connected Tamper switch in the case Connection for door contact For doors, gates, garages, shutters, etc. 12V switched output 01-10 seconds adjustable (open-circuit or closed circuit) Switching time of the alarm output (sabotage) 0-3 minutes adjustable Fail-safe EEPROM memory power No PC connection blue backlit touch panel Intergrated LED and beeper Transponder read distance: up to 6cm Finger Sensor Resolution: 450 dpi Reading time: <1 sec Indentification time: <1 sec FAR: < 0,00002561% FRR: < 0,0198% Dimensions: 115x70x35mm Weight: ca.500gr Power supply: 12V DC (8-14V) Power consumption: about 20-90mA Temperature range: -20° C to 60 ° C. Output load: 20A maximum (short circuit) RFID type: Universal 125kHz (EM4102 or compatible) including interface: Wiegand 26 bit Installation and operating instructions Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label  

Sebury  sTouch wide Stand alone access control systemCan be used as a complete device with integrated memory and relay outputoras tamper-resistant  reader  connected with a door controller-Elegant and robust aluminium housing-Waterproof IP65-Illuminated metal keyboard and RFID reader for contactless transponder-2000 memory locations for key codes and transponder-Adjustable: Code or transponder code transponder or only transponder-additional data output for professional applications: Wiegand 26-37 bit-Tamper inside-Integrated led and beeper-Acoustic alarm for sabotage-Alarm output-integrated AC relay-Circuit as impulse 1-99 seconds- or as a permanent circuit on off on off for switching functions-Push button directly deduced (internal resistance approx. 80 ohms) only for electronic chime (max. 10mA)or doorbell＞ decoder-Multi user feature, 2-10 persons to identify themselves before the door is opened.-Circuit as a single unit or as anti-PassBack with two readers for a door-Reading distance tag: up to 3-10cm-Mass sTouch w: 125x83x22mm-Power supply: 12V DC-Current: 35mA-Temperature range:-40 ° C to 60 ° C-Indicator: multi function display (can be switched off)-Keypad illumination: white (can be switched off or automatic approach)-Keypad tones (can be switched off)Readable tag types:125 kHz (HID PROX, EM4100, EM4102, EM4200 or compatible) unique/universalPRODUCT COMPARISONScope of delivery:-Outdoor unit/access host sTouch standalone wide-Manager cards (learning and deleting card)-Small - and fixing material-Manual (English) print-Guide (german) as PDFManual DownloadOptional AccessoriesInstallation cable by meterTags's: EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder

Sebury  sTouch wide Stand alone access control system with PIN Code and ISO14443 tags Can be used as a complete device with integrated memory and relay outputoras tamper-resistant  reader  connected with a door controller -Elegant and robust aluminium housing-Waterproof IP65-Illuminated metal keyboard and RFID reader for contactless transponder-2000 memory locations for key codes and transponder-Adjustable: Code or transponder code transponder or only transponder-additional data output for professional applications: Wiegand 26-37 bit-Tamper inside-Integrated led and beeper-Acoustic alarm for sabotage-Alarm output-integrated AC relay-Circuit as impulse 1-99 seconds- or as a permanent circuit on off on off for switching functions-Push button directly deduced (internal resistance approx. 80 ohms) only for electronic chime (max. 10mA)or doorbell＞ decoder-Multi user feature, 2-10 persons to identify themselves before the door is opened.-Circuit as a single unit or as anti-PassBack with two readers for a door-Reading distance tag: up to 3-10cm-Mass sTouch w: 125x83x22mm-Power supply: 12V DC-Current: 35mA-Temperature range:-40 ° C to 60 ° C-Indicator: multi function display (can be switched off)-Keypad illumination: white (can be switched off or automatic approach)-Keypad tones (can be switched off) Readable tag types:13,56 MhzISO14443 1k, 4k, 4byte or 7byte PRODUCT COMPARISON Scope of delivery:-Outdoor unit/access host sTouch standalone wide-Manager cards (learning and deleting card)-Small - and fixing material-Manual (English) print-Guide (german) as PDF Manual Download Optional AccessoriesInstallation cable by meterDoor OpenerController Network Controller Compact Doorbell decoder    

Compact access control system The door can be opened by fingerprint or tag or with PIN code Touchless transponder technology RFID Failure safe EEPROM memory Connection for door chime For up to 3000 people Power saving Connection for door contact LED status indicator Transponder cards as keychains available Cover contact (tamper) Relay output for door opener Connection for external opening button Alarm output Wiegand 26bit data output for door controller Now with managing card Input voltage DC 12 V Power consumption 100mA Dimensions 155 x 66 x 28 (mm) Weight 206 g incl. packaging and accessories Temperature range -20°C to 50°C Humidity 20% - 80% Capacity: 3000 user RFID Chip type: EM4102 and compatible Transponder reading distance of 3-10 cm Manual Optional Accessories: Installation cableNetwork controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

PIN-Code radio access controly systemSabotage-Safe standalone set of outdoor and indoor unitPerfect for environments where no cable can be laid or the installation effort is too heavy.hopping code method, tamperproof 100 memory locations for key codes 4-8 digits2.4 Ghz data transfer between devicesRange up to 15m - Extreme power saving mode (standard batteries last about 2 years with 100 openings per day)Changeover relay for door opener or opening of gates, doors, shutters, etc., or for switching tasks such as alarm or light, etc. Relay output Pulse 01-99 seconds adjustable (open-circuit or closed-circuit) or permanent contact on-off switch for tasks such as alarm or light, etc.Power failure Secure EEPROM MemoryIntegrated LEDs and BeeperIncl "M3" double adhesive tape for mounting on glass or ceramic.Dimensions Keypad: 135x54x19mmDimensions Controller: 65x54x19mmPower supply Keypad: 3 x AAA battery 1.5VPower Supply Controller: 12V DC +/- 20%Current consumption keypad rest: 0,01mAPower consumption Controller rest: 20mAPower consumption Keypad active: 0.4mAPower consumption Controller active: 40mATemperature range: -20 ° C to 60 ° C (0% to 86% relative humidity)Indicator light: multicolor LED and beeper (can be switched off)

Sebury sKeyStand alone access control systemavailable as a complete unit with integrated storage and relay outputor as tamper-resistant as a pure variant reader in combination with a door controllerElegant and robust aluminum housingWaterproof IP65Metal keypad and RFID reader for contactless transponder2000 memory locations for key codes and transponders- Adjustable : code or transponder / transponder code and / transponder only- Additional data output for safety applications : Wiegand 26-37 bits- Tamper switch in the housing- Intergrated LED and beeper- Audible alarm if tampering- Alarm output- Bell push out directly- Transponder reading distance : up to 3 -10cm- Dimensions sKey -w : 125x83x22mm- Power supply: 12V -24V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Indicator : multi-function display (can be deactivated )- Keyboard illumination : white ( can be switched off or automatic on approach )- Keypad tones (defeatable )Readable transponder types :125 kHz ( HID Prox , EM4100 , EM4102, EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / access host sKey standalone wide- Card Manager ( Learning and delete card )- Small and Fixings- Manual (english) Print- Manual ( German ) as PDFimmediately ordered, butDelivery time is about 3-4 weeks ...ManualOptional AccessoriesInstallation cable by meterTag's EM or HIDDoor OpenerController NetworkController CompactDoorbell decoder