Access Control mReader Multi RFID Reader
€79.00*
Total Price incl. Accessories €79.00*
Available, delivery time: 1-3 days
Product number:
mReader
Product information "Access Control mReader Multi RFID Reader"
Access Control Multi RFID Reader
RFID wall mountable reader for EM4102 and 13,56MHz
Full metal housing with concentrated double reading field through the LED bar
International award-winning design
Potted waterproof, suitable for outdoor areas
International award-winning design
Potted waterproof, suitable for outdoor areas
TheRFID card reader will beconnected to access controller like sBoaard and SC3000NT via the Wiegand interface.The relay switching takes placein doors,sabotage attempts on the wall readers are therefore ineffective.
- Material: full metal, finished,
- Color: cappuccino black
- Dimensions: 103x48x22 mm
- Temperature range: -20 ° C to 50 ° C
- Protection class: IP65
- Multiprotocol RFID: 125kHz: HIDprox, EM4102, EM4100, EM4200
- Compatible RFID Chip types:13.56 MHz: compatible to Mifare® Classic 1k and 4k, 4byte and 7byte UID ISO14443A
- Compatible RFID Chip types: 13.56 MHz: compatible to DESFire® EV1 and EV2, compatible to Ultralight®, NTAG and compatible 7byte UID
- Power supply: 12V DC, <35mA
- Operating display: LED bar red
- Green LED bar and beeper can be controlled
- Tampering alarm function
- The cable length to the controller can be up to 100m.
- Wiegand output: 34 bit for all protocols
| Protokoll, Bauform, Relais, : | Wasserdicht, Wiegand 34 |
|---|---|
| RFID Lesbarer Chiptyp: | 13,56 MHz, 125 kHz, Desfire®, EM4102, Mifare® Classic, NTAG, Ultralight® |
Login
A55M
€29.90*
Active RFID reading antenna for contactless ISO14443 tagsTamper-proof because the evaluation electronics / controller is mounted in the fuse areaAttempts to sabotage the antenna have no effectIntegrated LEDs and beeperWaterproof encapsulated, suitable for outdoor applicationsDimensions:110x48x20mmColour: blackPower supply: 12V DCPower consumption: approx. 45mAReading distance: up to 5cmInterface: Wiegand 34bitCompatible Transponder types: 13.56 Mhz, ISO14443 1k or 4k (4byte and 7byte), Status display: Red LED onRFID recognition: green LED on, beeper onCompatible USB readers for access control (Wiegand 34):
A50M
€39.90*
Active RFID reader antenna for contactless EM transponder Tamper-proof mounted, the controller is in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 80x42x14mm Power supply: 12V DC Current consumption: approx 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 10cmRFID type: 13,56 Mhz , ISO14443 1k and 4k
sKey Reader R-W
€74.50*
Sebury sKey wide keyboardTamper -proof outdoor unit without saving- Elegant and robust aluminum housing- Waterproof IP65- Illuminated Metal Keypad and RFID reader for contactless transponder- Data connection to a controller- Delivery without door controller- Data output: Wiegand 26-37 bits- Tamper switch in the housing- Intergrated LED and beeper- Audible alarm if tampering- Bell button directly led out ( internal resistance of about 80 ohms) for electronic Gong ( max. 10mA ) or Doorbell decoder- Transponder reading distance : up to 3 -10cm- Dimensions sKey R w: 125x83x22mm- Power supply: 12V DC- Current: 35mA- Temperature range : -40 ° C to 60 ° C- Status display : multi-function display (can be deactivated )- Keyboard Backlight : white, On or Off , or Auto ( the 1st press ON , 30 sec OFF)- Keypad tones (can be disabled )Readable transponder types :125 kHz- HID Prox- EM4100 , EM4102 , EM4200 or compatible) Unique / UniversalScope of delivery:- Outdoor unit / Access host sKey reader -R -w- Small and fixing material- Manual (english) Print- Manual ( German ) as PDFPDF- ManualOptional AccessoriesInstallation cable by meterTags's: EM or HIDDoor OpenerController Network
Controller Compact
Doorbell decoder
Sboard ISO14443
From
€25.50*
Open door access controllerAccess control system for Wiegandable access readersorcontrol unit as EMA arming/disarming device1000 memory locations for transponders or PIN codesAccess with RFID only, PIN only or RFID + PINSingle RFID tags and PINs can be deleteted separatlyExternal door release button can be connectedLED output for display on the readerOutput adjustable via jumperVoltage is switched directly through (factory setting) or floating relay contact Change-over contactPulse 1-99 seconds or Dynamic ON-OFF-OFF-OFF....Power-fail-safe EEPROM memoryBlock storage with sorted transponders Enter the first UID number and quantity, ready (e. g. 1000 pcs. in approx. 2 minutes)No PC connection neededCopy the entire memory contents into one or more sBoards as a "backup copy" or as a fast creation for several doorsWiegand input 26-37bit e. g. for RFID readers EM4102, HITAG, ISO14443, LEGIC, UHF, etc. with or without PIN-code keypad, magnetic card reader, fingerprint reader, biometric face recognition.When using ISO14443 wall scanners, please always order the ISO14443 programming card set as well, or alternatively use the supplied remote controlDimensions: 65x54x19mmWeight: 40gOperating temperature: -40°C to 60°CPower supply: 12V DC voltageOutput load: max. 2Aincl. infrared programming device for all changes, settings (password protection 6-digit)incl. programming cards Set for your selected ISO14443 wall readerEnglish instruction manualGerman manual as PDF filePower indicator: LED redLED and signal tones can be switched off Wiring samplesHow do I open the case?Operating instructions (german)Manual (english)AccessoriesProgramming Card Set for ISO14443 ReaderInstallation cableSuitable readers with EM 4102 technologySuitable readers with ISO14443 technologySuitable readers OtherPower suppliesDoor opener
HDR-30-12 Power Supply
€22.90*
Energy-efficient and space-saving power supply for installation in electrical distribution boards (DIN rail); The power supply is suitable for all access control devices available in the shop such as code locks with PIN code and RFID as well as access controllers and RFID readers. The power supply unit is simply plugged onto a top-hat rail in your electrical distribution system and snapped in. The wires to be stripped are connected via the screw terminals. 2 TE (35mm) narrow version Stabilized output voltage, short-circuit proof Input: 85 - 264V AC, 50/60Hz 0,3W Idle power Short circuit proof Overvoltage protection category 3 overload protector Output: 12V DC / 2000mA LED for operating status display Dimensions: 35x90x55mm Ambient temperature: -30°C to 70°C Compatible to DIN rail TS-35/7.5 Colour: black
SC3004NT
€199.00*
Four Door ControllerIndependent media,Compatible with wiegand reader: RFID (125khz, 13.56 MHz, 868 MHz), code keypads, fingerprint systems, magnetic card reader, etc.1 relay output for door opener, barrier system, etc.Any number of controllers of the IK-Point SC300xNT series and nearly unlimited numbers of persons can be centrally managed through the access control software.Inputs for external buttons, door monitoring, evaluation for unauthorized opening, etc.The cable length to the external readers can be up to 100m.Use as a powerful door controllers with Windows software or as a simple system with basic functions managede via web browserTransponder can be taught in four ways into the system:- Teaching at the door reader- Teach using a USB reader RD105-US 8D WEG26- Manual input on the PC keyboard (if the Wiegand number is known)- Block storage of assorted transponders (eg 1000 pcs in a minute)Memory for up to 20,000 peopleEvent memory up to 100,000 eventsBoard dimensions: 160x106mmincluding LAN interface RJ45including 2 x Wiegand 26 Interfaceincluding extensive English-language Windows software (free)or as a German-language Windows software (free of charge)Attention!The new SC3000 controllers are not compatible with the old SC9000 controllersAccessories Installation cable by meter Periphery Output board Casing without power supplyor Case with power supply WIFI adapter Compatible RFID / PIN Code readerDoor Opener Door Contact
SC3001NT
€159.00*
Single Door ControllerIndependent media,Compatible with wiegand reader: RFID (125khz, 13.56 MHz, 868 MHz), code keypads, fingerprint systems, magnetic card reader, etc.1 relay output for door opener, barrier system, etc.Any number of controllers of the IK-Point SC300xNT series and nearly unlimited numbers of persons can be centrally managed through the access control software.Inputs for external buttons, door monitoring, evaluation for unauthorized opening, etc.The cable length to the external readers can be up to 100m.Transponder can be taught in four ways into the system:- Teaching at the door reader- Teach using a USB reader RD105-US 8D WEG26- Manual input on the PC keyboard (if the Wiegand number is known)- Block storage of assorted transponders (eg 1000 pcs in a minute)Memory for up to 20,000 peopleEvent memory up to 100,000 eventsBoard dimensions: 160x106mmincluding LAN interface RJ45including 2 x Wiegand 26 Interfaceincluding extensive English-language Windows software (free)Attention!The new SC3000 controllers are not compatible with the former SC9000 controllers
Wiring German Manual English Software German manual for the German software Accessories Installation cable by meter Periphery Output board Casing without power supplyor Case with power supply WIFI adapter Compatible RFID / PIN Code readerDoor Opener Door Contact
SC3002NT
€169.00*
Two Door ControllerIndependent media,Compatible with wiegand reader: RFID (125khz, 13.56 MHz, 868 MHz), code keypads, fingerprint systems, magnetic card reader, etc.1 relay output for door opener, barrier system, etc.Any number of controllers of the IK-Point SC300xNT series and nearly unlimited numbers of persons can be centrally managed through the access control software.Inputs for external buttons, door monitoring, evaluation for unauthorized opening, etc.The cable length to the external readers can be up to 100m.Use as a powerful door controllers with Windows software or as a simple system with basic functions managede via web browserTransponder can be taught in four ways into the system:- Teaching at the door reader- Teach using a USB reader RD105-US 8D WEG26- Manual input on the PC keyboard (if the Wiegand number is known)- Block storage of assorted transponders (eg 1000 pcs in a minute)Memory for up to 20,000 peopleEvent memory up to 100,000 eventsBoard dimensions: 160x106mmincluding LAN interface RJ45including 2 x Wiegand 26 Interfaceincluding extensive English-language Windows software (free)Attention!The new SC3000 controllers are not compatible with the old SC9000 controllersAccessories Installation cable by meter Periphery Output board Casing without power supplyor Case with power supply WIFI adapter Compatible RFID / PIN Code readerDoor Opener Door Contact