Readers for RFID tags and PIN code and fingerprint for access controllers

Active RFID reading antenna for contactless ISO14443 tagsTamper-proof because the evaluation electronics / controller is mounted in the fuse areaAttempts to sabotage the antenna have no effectIntegrated LEDs and beeperWaterproof encapsulated, suitable for outdoor applicationsDimensions:110x48x20mmColour: blackPower supply: 12V DCPower consumption: approx. 45mAReading distance: up to 5cmInterface: Wiegand 34bitCompatible Transponder types: 13.56 Mhz, ISO14443 1k or 4k (4byte and 7byte), Status display: Red LED onRFID recognition: green LED on, beeper onCompatible USB readers for access control (Wiegand 34):  

Reader with integrated RFID antenna for contactless Tags, Cards, Key fobs solid steel housing, matted surface, vandal and tamper-proof For use with access controller Wiegand port for connection to door controller blue backlit keypad LEDs and beeper Intergrated Reading distance: up to 6cm Temperature range: -40 ° C to 60 ° C Dimensions: 128x82x28mm Weight: ca.500g Power supply: 12V DC (8-14V) RFID type: Universal 125kHz (EM4102 or compatible) Installation and operating instructions Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reading antenna for EM4102 tags, cards, key fobs Sabotage-proof since the evaluation electronics / controller is mounted in the fuse area Sabotage tests on the antenna are ineffective LEDs and Beeper Open circuit board for self-assembly Dimensions of antenna: 60x36x2mm Power supply: 12V DC Interface: Wiegand 26/34 bit switchable Power consumption: approx. 45mA Reading distance: up to 10cm Transponder type: 125 khz, EM4102, EM4100, EM4200, Unique or Compatible (UID) Status indicator: Red LED on RFID detection: Green LED on, beeper on   Optional Accessories: Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna, long rangeWide-range antenna / distance antennaSuitable for all contactless universal transponder EM4102 or compatible.Sabotage safe because the electronic components are mounted in the security areaSabotage on the antenna are ineffectivebeeper IntergratedSplash-proof, suitable for outdoor applicationsDimensions: 240x240x35mmPower supply: 12V DCPower consumption 100mA 2 wires for data transfer (send and receive) The cable length to the controller up  to 100m Read range:  cards up to 80cm , key fobs up to 60cm Tag type: 125kHz, EM4102 (Universal) and compatible Temperature range -20 ° C to 70 ° C Wiegand26 Optional Accessories: Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna for contactless universal transpondersTamper-proof as the evaluation electronics is mounted in the safe areaSabotage attempts at the antenna are ineffectiveLEDs and beeper integratedWaterproof sealed IP65Dimensions: 86x86x19mmPower supply: 12V DC voltagePower consumption: 45mA2 cores for data transmission (transmission and reception)Wiegand34 output format and PIN code 4BitThe cable length up to the controller can be up to 100m.Read distance: up to 5cmInterface: Wiegand 34bitTransponder types:    Cards and key fobs: ISO14443 1k or 4k (4 byte and 7byte) transponder cards and key fobs, Status display: LED red onTransponder detection: Green LED on, beeper onCompatible USB readers for access control (Wiegand 34):ISO14443 1k or 4kDesfire® EV1 and EV2Optional accessories:Installation cableNetwork TCP-IP ControllerorController Compact (not compatible with Sboard-II)

Active RFID reader antenna for EM RFID Cards and Tags Solid plastic case Secure trought the controller mounted into the security restricted area Sabotage attempts are ineffective on the antenna Integrated LED and beeper Standby = LED off Detection tag = short green LED Beeper and green LED can be externally controlled Waterproof resin, suitable for outdoor applications Dimensions: 86x86x19mm Mounting plate hole spacing 60 mm Suitable for mounting on Flush-mounted boxes Power supply: 12V DC Power consumption: approx. 45mA Temperature range:-20 ° C to 60 ° C Protection class: IP68 Cable length: 20 cm Read speed: 0.1 seconds Interface: Wiegand 26/34 bit switchable 2 wires for data transfer (sending and receiving) The cable length can be up to 100 m to the controller. Reading distance: up to 6 cm Transponder type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

Active RFID reader antenna for tags with EM RFID Chip Solid plastic housing with metal casing SSecure through the sabotage safe mounted controller in the security restricted area Sabotage attempts are ineffective on the antenna Integrated LED and beeper Standby = LED off Detection tag = short green LED Beeper and green LED can be externally controlled Waterproof resin, suitable for outdoor applications Dimensions: 110x48x20mm Power supply: 12V DC Power consumption: approx. 45mA Temperature range:-20 ° C to 60 ° C Protection class: IP68 Cable length: 20 cm Read speed: 0.1 seconds Interface: Wiegand 26/34 bit switchable 2 wires for data transfer (sending and receiving) The cable length can be up to 100 m to the controller. Reading distance: up to 6 cm RFID Chip Type: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

With this QR Code access system you can grant your customers or guests access with QR codes sent to their mobile phone or smartphone. Other possible applications include the activation of a goods issue, admission control for events, etc. The QR Code Reader is connected to the interface adapter included in the set at the SC3001NT controller reader input. After configuring the SC3001 access control with the management software, any QR codes can be created for the access.The set contains the following items:1 x QR Code Scanner BS-4301 x Access controller SC3001NT1 x Software Z3D in german1 x QR Code Software to create the QR Codes

By presenting a smartphone with a displayed or paper code, previously authorized QR/barcode, image recognition is automatically activated. Alternatively, non-contact RFID transponders can also be recognized via the integrated reading field. After successful reading, a beep is emitted and the read code is transmitted to the evaluation unit. Depending on the authorization specified, a switching contact is released to open the door or similar.    Robust frontal reader for 1D, 2D, barcodes and QR codes    including RFID reader for Unique Transponder 125 khz, EM4102/EM4200    Dimensions: WxHxD 86x86x18mm    Can be mounted on a flush-mounted box    Electronics cast with epoxy    Image recognition reading distance 5cm to 30cm    Automatic reading mode preset    Lighting QR code scanner adjustable    for 12V DC / 400mA    IP52    Operation LED blue, detection LED green    Output format preset:    QR code/barcode: Wiegand 34bit    RFID 125khz: Wiegand 34bit     simple door controller    Network door controller

Active RFID reader antenna, wide-range antenna or antenna distance with extreme range of car or truck access control E801 adhesive transponder to the windshield or car UHF tags on or behind the front apron or ISO card K600-A-UNI + UHF Suitable for all contactless UHF transponders 868Mhz or compatible Sabotage-proof because the transmitter is mounted in the security area Sabotage attempts on the antenna are ineffective Beeper integrated Splash-proof, suitable for outdoor applications Dimensions: 220x220x50mm Power supply: 12V DC Current consumption approx 150mA incl. connection for Wiegand data Default: 15 seconds after detection Lesepause The cable length to the controller can be up to 100m. Reading distance: up to 6m, (depending on circumstances) Tag type: U-Code HSL or compatible Delivery incl. Mounting Unit

Active RFID Reader for contactless MIFARE® DESFire® EV1 TagsSabotage-proof because the transmitter / controller is mounted in the fuse area sabotage attempts on the antenna are ineffectiveIntergrated LED and beeper Splash-proof, suitable for outdoor applicationsDimensions: 126x68x19mmPower supply: 12V DCPower consumption: ca. 10mA2 wires for data transfer (sending and receiving)The line length to the controller can be up to 100m.Reading distance: up to 10cmReadable RFID type: 13.56Mhz compatible to MIFARE® DESFire® EV1Optional accessories:Controller  

Active RFID reader antenna for EM4102 tags Solid metal case Secure through the sabotage safe mounted controller in the security restricted area Sabotage attempts are ineffective on the antenna Integrated LED and beeper Standby = LED off Detection tag = short green LED Beeper and green LED can be externally controlled Waterproof resin, suitable for outdoor applications Dimensions: 104x50x19mm Power supply: 12V DC Power consumption: approx. 45mA Temperature range:-20 °C to 60 °C Protection class: IP68 Cable length: 20 cm Read speed: 0.1 seconds Interface: Wiegand 26/34 bit switchable 2 wires for data transfer (sending and receiving) The cable length can be up to 100 m to the controller. Reading distance: up to 6 cm RFID Chip: 125 khz EM4102, EM4100, EM4200, unique, or compatible (UID) Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Fingerprint access control door readerWall Mounting Only compatible to SC300xNT Türcontrollerwith access control management software from 7.81For Windows XP, Win7, Win8, Win10Supply 12V DC (100mA current consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIWiegand outputMatching fingerprint readerApplication/Description

Fingerprint access control door readerWall Mounting Only compatible to SC300xNT Türcontrollerwith access control management software from 7.81For Windows XP, Win7, Win8, Win10Supply 12V DC (100mA current consumption)Solid Aluminium housingDimensions: 120x72x20mmResolution: 450 DPIWiegand outputMatching fingerprint readerApplication/Description

Robust mini reader for D1, D2, QR codesDimensions: WxHxD 41x23x50mmwith RS232 outputincl. power supply unitautomatic reading mode presetin conjunction with our Wiegand converter, an access control system with barcode cards can be set up.simple door controllerNetwork door controller

The QR Code and Barcode Scanner with RFID reader is suitable for connecting or expanding your access control with Wiegand interface. In addition to authorized RFID cards and keys, you can send QR Codes to your customers for access or other applications to their mobile phone or smartphone. These QR Codes are authorized for e.g. door opening, operation of a barrier system, goods issue etc. in the evaluation unit such as sBoard or SC3000NT. By holding a smartphone with a displayed QR Code or barcode card in front of it, the reader is automatically activated. After successful reading, a beep is emitted and the code read in is transmitted to the evaluation unit. In addition, a full-fledged RFID MIFARE® reader is integrated, which allows access even with RFID tags.    Robust mini-reader for 1D, 2D, barcodes QR-Codes    Readable codes: EAN-13, EAN-8, UPC-A, UPC-E, Code128, Code39, Codabar,    UCC/EAN 128, RSS, ITF, ITF-14, ITF-6, Standard-25, Matrix-25, COOP-25,    Industrial-25, Plessey, MSI-Plessey, Code-11, Code-93, Code-49, Code16k,    PDF417, QR Code, Data Matrix, AZTEC, CSC, Maxicode, Micro-QR,    Micro-PDF417, Code One, etc.    compatible to MIFARE® Classic / DESFire® / NTAG reader integrated    Wall mounted enclosure    Dimensions: WxHxD 78x125x25mm    with proximity sensor    automatic reading mode preset    for 12V DC    Wiegand 34bitPre-assembled incl. Wiegand 34bit converter and the components listed below, an access control with barcode cards and QR Code can be set up.    simple door controller    Network door controller The connection diagram for the access control with network controller SC3001NT can be downloaded hereWiring diagram QR Code reader BS-430 with SC3001NTComplete setHere you find the QR Code complete setAnd here we produce QR Code labels:32x22mmor80x50mm

Active RFID reader antenna for contactless HITAG tags Tamper-proof mounted, the controller is in the security area Dimensions module including antenna: 45x41x10mm Power supply: 12V DC Power consumption: about 45mA Interface: Wiegand 26 2 wires for data transfer (send and receive) The line length to the controller can be up to 100m. RFID Reading distance: up to 10cm RFID type: 125 khz, HITAG 1, HITAG 2, HITAG S or compatible (UID) Status display: none

Active RFID reader antenna, wide range antenna or long range distance antennaSuitable for all UHF Tags  868 MHz or compatibleIntegrated beeperSplash-proof, outdoor suitableDimensions: 160x160x55mmPower supply: 12V DCPower consumption approx. 280mAPreset: Wiegand26bit outputDefault: read break detection 5 seconds(applies only to the currently read transponders)The antenna can be adjusted for the two types of reading EPC or TID(Please specify when ordering)The cable length can be up to 100 m to the controller.Reading distance: up to 3 m (depending on conditions)Transponder type: U-code HSL or compatibleScope of delivery incl. mast bracketWiring with W2-2Wiring with network controllerUHF Tags are well recognized when you  stick on a car windshield (min. 5cm please maintain a distance from metal spars) E801 or E802 or screw mounting on a vehicle sign holder or glued behind the plastic front bumper E840The dual cards K600-A-UNI + UHF have a UHF and a 125 kHz LF to use tag to multiple systems. The cards are read well if they are held to the antenna in the hand, there is but a severe restriction of the range when the cards are tightly worn on the body. Water or metal weakens the reading field.All UHF transponder with your two basic reading types:Article design reading strategiesE801 sticker TIDE802 sticker EPCE804 sticker TIDE840 car Assembly TIDE850 laundry transponder TIDE509 bracelet TIDK600 map TID and EM4102K810 Keychain EPC

This hand-held scanner with Wiegand 34-bit output format is the alternative to the BS-430 wall scanner and can be used for events or selective events as a person authorization with e.g. turnstile activation. You can send your customers QR codes to their mobile phones or smartphones for access or other applications, which are authorized, for example, to open doors, operate a barrier system, goods issue etc. in the evaluation unit such as sBoard or SC300xNT.    Robust hand reader for 1D, 2D, barcodes and QR codes    Cable length about 2m    Scans at the touch of a button    for 12V DC    Output format Wiegand 34bitPre-assembled including Wiegand 34bit converter and the components listed below, an access control with barcode cards and QR code can be set up.    simple door controller    Network door controller The connection diagram for access control with network controller SC3001NT can be downloaded here:Connection diagram QR code reader BS-430 with SC3001NT finished QR code labels:32x22mmor80x50mm

RFID reading unit with integrated magnet for activating RFID cards and key fobs with switching contact Compatible with EM4102 RFID technology Solid plastic housing For mounting, e.g. on doors with connection to a separate evaluation unit Sabotage-proof because the evaluation electronics/controller is mounted in the security area LED and beeper integrated Standby = LED red Transponder detection = LED briefly green Beeper and green LED can be controlled externally Waterproof potted, suitable for outdoor applications Dimensions: 110x48x20mm Hole spacing of mounting plate 75mm Power supply: 12V DC Current consumption: approx. 45mA Temperature range: -20°C to 60°C Protection class: IP68 Cable length: 20cm Reading speed: approx. 0.1 seconds Interface: Wiegand26 / Wiegand 34 bit switchable 2 wires for data transmission (sending and receiving) The cable length to the controller can be up to 100m. Reading distance: up to 6cm Transponder type: 125 khz, EM4102, EM4100, EM4200, Unique or compatible (UID)

RFID and Code / 500 peopleMini reader with integrated RFID reader antenna for contactless tags, cards, fobs with EM4102 RFID ChipIntegrated controller and active antenna· - Use as a standalone device (standard)· - Use as Wiegand26 readers with a door controller· - Connecting of external readers is not possible500 memory locations for transponder500 memory locations for keyboard codesOnly transponder code or RFID, RFID code +Individual transponders deleted in case of lossExternal door opener button can be connectedTamper switch in the housingConnection for door contactOpen doors, gates, garages, shutters, etc.12V switching output 00-99 seconds adjustable (shunt or quiescent)Power failure safe EEPROM memoryNo PC connectionReading Distance: 3 - 10cmDimensions: 90x60x27mmPower supply: 12V-24V DCCurrent consumption: 20mABacklit keypadLoad switch output: 2000mA maxTransponder type: Universal 125kHzTemperature range: -40 ° C to 60 ° CAssembly and operating instructions   Optional Accessories Tags, Cards, Fobs Reader (W1-C is indoor mounted) Controller (W1-C is outdoor mounted as Reader) Power Supplies Locker & Strikes

Active RFID reader antenna for contactless EM Tags Sabotage-Safe full metal case Tamper-proof mounted since the transmitter / controller in the security area Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 135x58x26mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID Chip typ: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID)   Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label

Active RFID reader antenna for contactless EM tagsSabotage-Safe  full metal case Tamper-proof mounted since the transmitter / controller in the security area is Sabotage attempts on the antenna are ineffective Integrated LEDs and beeper Waterproof cast, suitable for outdoor applications Dimensions: 128x82x28mm Power supply: 12V DC Current consumption: approx 65mA Temperature range: -20 ° C to 60 ° C. Protection class: IP68 Read speed: 0.1 second Interface: Wiegand 26 2 wires for data transfer (send and receive) The cable length to the controller can be up to 100m. Reading distance: up to 6cm RFID type: 125 kHz, EM4102, EM4100, EM4200, Unique or compatible (UID) EM4102 RFID Reader for Access Control Optional accessories:Installation cableTCP-IP controllerorCompact controllerCompatible Tags, Cards, Key Fobs, Label